DT-232 Connector
View
|
The
DT-232 is an inexpensive dial-up remote
control with amazing capabilities! It
gives you DTMF access to four, user
programmable relays that can be
momentary, latching, etc. Relays can be
programmed to respond to any DTMF tone
or sequence.
The
DT-232 can output serial data, in your
user-defined format, so it can interface
to virtually any piece of hardware that
requires serial control or input. The
DT-232 receives DTMF tones from either
its audio input connector or from its
built-in telephone autocoupler. The DTMF
tones are converted to, user defined,
ASCII data & transmitted to the host
computer or remote equipment.
In
addition to receiving DTMF tones, the
DT- 232 can accept ASCII input from it’s
serial port and generate DTMF tones that
are transmitted to a phone line for
controlling equipment in remote
locations.
Telephone audio is passively coupled to
the audio jack for remote broadcasting.
A
free Windows program makes control and
programming incredibly simple. You can
also operate the DT-232’s basic
functions from any terminal program on
almost any type of computer. The free
software Lets you upload, download save
your DT-232 configurations. Software is
required for the advanced programming
functions.
|
|
|
|
The
CircuitWerkes DT-232 dial-up
remote control &
DTMF-to-ascii transceiver is
perfect for any situation
where you need
to interface DTMF tones
to virtually any type of
equipment. The DT-232
speaks your language because
you program its
outputs. It is
easily the most
versatile controller
made today!
|
| Features
|
|
>
|
Converts
DTMF tones to user defined
ASCII strings and
sends them out via serial
port.
|
|
>
|
Four on-board
SPST relays can be controlled
via DTMF tones or sequences.
|
|
>
|
Accepts
DTMF from either it’s audio
input port or the built-in
autocoupler.
|
|
>
|
Auto-answers
on user selectable ring
number and auto-drops at
call's end.
|
|
>
|
4-digit
user-settable password prevents
pirating.
|
|
>
|
Each relay
can be independently set
to function as a momentary
closure, latching closure
with distinct on/off
codes, interlocked
latching with other relays
& more.
|
|
>
|
Any relay can be
assigned to any tone(s).
|
|
>
|
Decodes
up to 16 user-defined, DTMF,
sequences.
|
|
>
|
Each
sequence can have up to 7
actions, including: Close
relay, open relay, timed
closure/timed open,toggle
relay, pause, send ascii &
jump to sequence ##.
|
| >
|
Serial outputs
can be up to 32 characters and
are completely
user-programmable. Using action
sequences, strings can even be
combined
|
|
>
|
Accepts serial
data input & sends DTMF
tones for controlling remote
equipment on phone lines.
|
|
>
|
Windows™
based user interface for PC
users simplifies control and
programming & lets you
save your DT-232
configurations.
|
|
>
|
Each relay is
programmable to beep (send DTMF
tone) when activated. |
|
>
|
Provides phone
line audio input or output.
|
|
>
|
Relay
outputs appear on easy to
use screw terminals.
|
|
>
|
Retains its
settings after a power
failure. |
|
>
|
Rugged, metal case
can be table, wall or, optionally,
rack mounted. |
|
|
